car sound systrem: 2011

RM260

Soundstream SC-6T

6-1/2" Arachnid Series Comp

•Power Handling:

•Peak: 320 watts per set / 160 watts each side

•RMS: 160 watts per set / 80 watts each side

•White zirconium coated cone woofer

•Rubber surround

•1/2" Super dome tweeter

•Zolon coated low-resonance basket

•Rubber magnet cover

•4 ohms impedance

•1" Aluminum voice coil

•20oz. Magnet structure

•Top-mount depth: 2-1/2"

•White terminal connections

RM160

Soundstream SF-652T
•6-1/2" Arachnid Series 3-way Car Speakers
•Power Handling:
•Peak: 240 watts per pair / 120 watts each
•RMS: 120 watts per pair / 60 watts each
•White zirconium coated cone woofer
•Rubber surround
•1/2" Super dome tweeter
•Zolon coated low resonance basket

•Rubber magnet cover

•4 ohms impedance
•1" Aluminum voice coil
•5.4oz Magnet structure

•Top-mount depth: 2"

RM260

Soundstream SF-693T

6" x 9" Arachnid Series 3-way Car Speakers

•Power Handling:

•Peak: 400 watts per pair / 200 watts each

•RMS: 200 watts per pair / 100 watts each

•White zirconium coated cone woofer

•Rubber surround

•1/2" Super dome tweeter

•Piezo tweeter

•Zolon coated low resonance basket

•Rubber magnet cover

•4 ohms impedance

•1" Aluminum voice coil

•25oz Magnet structure

•Top-mount depth: 3-3/8"

•Sensitivity: 92 dB

•Frequency response: 60-20HZ

RM680

PCC6.N

6-1/2" Picasso Series 2-way Component Speaker System

Power Handling: Peak: 500 watts per set / 250 watts each side

RMS: 250 watts per set / 125 watts each side

Woven glass fiber/spruce pulp laminate cone woofer

NBR Rubber surround

1" Teflon/silk dome tweeter with resin coating

Black progressive conex spider
Nickel plated binding posts
Inverted polypropylene dust cap

Stainless stamped steel basket

Vented pole piece for added heat dissipation

Passive crossover with 12dB Low-pass for mid-bass

18dB High-pass with 3-way sensitivity for tweeter

4 ohms impedance

1" Copper voice coil on aluminum former

13oz. Magnet structure

Top-mount depth: 2-5/8"

RM1850

SOUNDSTREAM RF-60C
•6" 2-Way Reference Series Component Speaker System
•Power Handling:
•Peak: 720 watts per set / 360 watts each side
•RMS: 360 watts per set / 180 watts each side
•Treated and pressed paper cone woofer
•Butyl rubber surround
•1" Silk dome tweeter with ferrofluid cooling
•Large poly-cotton spider
•2-Way passive crossover network
•18dB/Octave crossover output
•4 ohms impedance
•3" High-temperature voice coil
•Aluminum voice coil former

•Cast aluminum basket

•20oz Magnet structure

RM260
SW-12SE

Dual 4 Ohm 12" Subwoofer

250W Continuous Power Handling

Black Zirconium Coated Injection Cone

NBR-Rubber Surround

2" KSV Kapton Voice Coil

Nickel Plated 8ga. Compression Wire Terminal

Poly Cotton Spider

Silver Texture Coat Finish on Stamped

Suspension Integrated Tinsel Leads
Steel Basket
Vented Pole Piece
Impedence: DVC 4
84.61dB

Mounting DepthWeight: 8 lbs

RM1200

Soundstream TSQ-124

12" 500W RMS DVC 4-Ohm Square Tarantula Component Subwoofer

•28% more cone area than round woofers

•Stamped steel basket w/ rolled edges

•Aluminum voice coil former

•Direct wire terminal design

•Injection molded polypropylene dust cap

•Clear TPX honeycomb cone

•Multi-roll NBR rubber surround

•Vented back plate

•Suspension integrated tinsel leads

•Mounting Depth: 7.375"

•Cutout Diamete •Sensitivity: 86.9 dB
•RMS Power Range : 500 Watts
•Impedance: Dual 4 Ohm

•Diameter: 12 Inch

RM960 PX4.580

Picasso Series 4-Channel Class AB Car Amplifier
RMS Power Rating:
4 ohms: 120 watts x 4 chan.
2 ohms: 190 watts x 4 chan.
Bridged, 4 ohms: 380 watts x 2 chan.
Fully regulated Pulse Width Modulated (PWM) MOSFET power supply
LED power (green) and protection (red) indicators
Selectable bass boost (0, 6, 12 dB at 45 Hz)
Soft start turn-on
4/3/2 Channel operation
Speaker-level inputs with signal sensing for automatic turn-on
Tri-Guard amplifier protection circuitry (thermal, overload, and speaker short protection)
Heavy duty aluminum alloy heatsink for excellent heat dissipation
Platinum-plated RCA level inputs
Platinum-plated screw terminals
Input sensitivity:
Low level: .2V
High level: 6V
Variable high-pass filter
Channels 1&2: (50-4,000 Hz)
Channels 3&4: (15-500 Hz)
Variable low-pass filter (50-4,000 Hz)
Damping factor: >181
Frequency response: 10-20,000 Hz
Dimensions: 15-1/2"L x 9-5/8"W x 2-1/4"H

4-gauge power and ground wiring is required for installation.

RM2680

TRX1000D

RMS Power Range : 500 Watts Number Of Channels: 1 Maximum Power: 1000 Watts Low Frequency response: 15 Hz High

Frequency Response: 250 Hz Built In Crossovers: Yes Channel Separation: Yes Tarantula series Mono Amplifier

RMS Power @ 4-ohm: 500W x 1
RMS Power @ 2-ohm: 800W x 2
RMS Power @ 1-ohm: 1000W x 1
THD: 0.05%
Class D Topology
TSTTM (Twin Stack Technology) Allows 2 amplifiers to power single load
FR-4 Circuit Board
Mono-block Mosfet Class D Circuitry
Continuously Variable Low-Pass Crossover
Continuously Variable Subsonic Filter
Variable 18dB Bass Boost
Platinum RCA and Power Inputs
1 Ohm Stability
Accepts up to 16V DC Power Input
Hi Gloss Piano Black Finish
End Caps for Professional Installation
Dimensions: 11"(W) x 2.6"(H) x 17.6" (L)

RM2900
TRX1500D

Technical Specification

* RMS Power Range : 800 Watts
* Number Of Channels: 1
* Maximum Power: 1500 Watts
* Low Frequency response: 15 Hz
* High Frequency Response: 250 Hz
* Built In Crossovers: Yes
* Channel Separation: Yes

Features

* Tarantula series Mono Amplifier

* RMS Power @ 4-ohm: 800W x 1

* RMS Power @ 2-ohm: 110W x 2

* RMS Power @ 1-ohm: 1500W x 1

* THD: 0.05%

* Class D Topology

* TSTTM (Twin Stack Technology) Allows 2 amplifiers to power single load

* FR-4 Circuit Board

* Mono-block Mosfet Class D Circuitry

* Continuously Variable Low-Pass Crossover

* Continuously Variable Subsonic Filter

* Variable 18dB Bass Boost

* Platinum RCA and Power Inputs

* 1 Ohm Stability

* Accepts up to 16V DC Power Input

* Hi Gloss Piano Black Finish

* End Caps for Professional Installation

* Dimensions: 11"(W) x 2.6"(H) x 20" (L)

RM 2680
TRX4.880
Soundstream Tarantula Series 4-Channel Class A/B Car Amplifier
RMS Power Rating:
- 4 ohms: 130 watts x 4 chan.
- 2 ohms: 220 watts x 4 chan.
- 4 ohms Mono: 440 watts x 2 chan.
PWM MOSFET power supply
IDI (Intelligent distress indicator) gives a visual indication of the amps protection status
Bi-linear crossovers for inputs and outputs (Hi/Full/Low)
LED power (green) and protect (red) indicators
Variable Bass Boost (0 to +18 dB bass boost)
4 channel operation
Preamp RCA outputs to daisy chain multiple amps
Tri-Guard amp protection (thermal, short, and impedance)
Hi gloss piano black heatsink for maximum heat dissipation
Platinum RCA level inputs
Platinum 4-gauge power connectors
Input sensitivity:
Input Level (Balanced): 0.02V-8V
Variable low-pass filter (50-150 Hz)
Variable high-pass filter (50-500 Hz)
Phase Shift: 0-180°
Frequency response: 10-35,000 Hz
Dimensions: 22-4/5"L x 11"W x 2-3/5"H
4-gauge power and ground wiring is required for installation.

RM2900
DTR1.220D
RMS Power Range : 1400-2200 Watts Number Of Channels: 1 Low Frequency response: 10 Hz
High Frequency Response: 220 Hz
Built In Crossovers: Yes
Channel Separation: Yes
Power output:
1400 Watts RMS x 1 @ 2 ohms
2200 Watts RMS x 1 @ 1 ohms
The worlds first vertical automotive stereo amplifier
Gloss black finish w/ brushed accents
Double sided pcb w/ smd components
aluminum alloy heat-sink
Regulated mosfet pwm power supply
Three-way protection circuitry (thermal, short, impedance)
Delayed on/off circuit
Variable crossovers (hpf/full/lpf)
Variable bass boost
Variable subsonic filter
Variable phase control
High level input
Signal-to-noise ratio: 92dB
Damping factor: >200
Signal voltage: 200mV-5V
Harmonic distortion: 0.50%
Dash mounted remote gain control
Direct wire 4ga. Power 8ga speaker terminal
Dimensions: H: 7.5" x W: 3.375" x L: 15.875"

RM1080
STL4.320
RMS Power Range : 200-3200 Watts

Number Of Channels: 4

Low Frequency response: 15 Hz

High Frequency Response: 25000 Hz

Built In Crossovers: Yes

Channel Separation: Yes

Power output:
50 Watts RMS x 4 @ 4 ohms
80 Watts RMS x 2 @ 2 ohms
160 Watts RMS x 2 Bridged @ 4 ohms
Stackable chassis for multiple amplifier applications
Black anodized finish w/ chrome accents
Double sided PCB w/ SMD components
Aluminium alloy heat-sink
MOSFET pulse width modulated power supply
Three-way protection circuitry (thermal, short, impedance)
Delayed on/off circuit
Tri-mode operation
Variable crossovers (HPF/Full/LPF/Band)
Variable bass boost
Variable subsonic filter
High level input
Signal-to-noise ratio: 91dB
Damping factor: >200
Signal voltage: 200mV-5V
Harmonic distortion: 0.03%
Direct wire 4ga. power, 8ga speaker terminals
Dimensions: H: 2.125" x W: 6.5" x L: 9.625"

RM990
STL2.350
Soundstream Stealth Series 2-Channel Class A/B Car Amplifier
RMS Power Rating:
4 ohms: 100 watts x 2 chan.
2 ohms: 175 watts x 2 chan.
Bridged, 4 ohms: 350 watts x 1 chan.
Full MOSFET Power Supply
Double side PCB and SMD components
LED power (green) and protect (red) indicators
2-Channel operation
Black anodized finish w/ chrome accents
Active X-over function
3-Way System Protection circuitry (thermal, overload, high/low voltage)
Stackable chassis for multiple amplifier applications
Heavy duty aluminum alloy heatsink for extreme heat dissipation
Nickel-plated RCA level inputs
Nickel-plated screw terminals
RoHS compliant device
Variable high-pass filter (15-200 Hz)
Variable low-pass filter (50-200 Hz)
Subsonic Filter (15-200 Hz)

Bass boost frequency: 30-90 Hz

Bass boost level: 0-12 dB

Signal-to-noise ratio: >100 dB

THD (Total harmonic distortion): 0.05%

Damping factor: >200
Frequency response: 15-25,000 Hz
Dimensions: 9-5/8"L x 6-1/2"W x 2-1/8"H